M-REJUN PORCELANIC by Tecno Prodist – (1 kg, White) – Mortar for Waterproof Grout Tiles and Floors, Ceramic Floors, Bricks, Stone, etc. (Joint Wide 4-20 mm)

M – REJUN PORCELANIC is a product formulated on the basis of cement, pure silicas and special fillers that give it properties for repairing cracks and sealing in brick, architectural stone joints as well as joints in different types of work units. Indoors, outdoor, floors and walls How to use preparation of the support on new floors do not apply M – PORCELANIC grille until at least 24-48 hours after placing ceramic pieces with cementitious adhesives. The surfaces of the joints and the edges of the parts must be clean, free of dust, grease and residue of the mortar or adhesive used in placing the tiles, or any other substances that may affect the adhesion of the product. When executing the grouting, respect the expansion joints by treating them with suitable sealants such as MASITEC FLEX W. Preparation of the mixture pour ¾ parts of the necessary amount of water into a clean container, and add M – PORCELANIC GRILLE gradually, kneading it manually or preferably with an electric drill low revolution (400–600). 0 rpm) Mixing disc for approximately 4 to 5 minutes until a homogeneous mass without lumps or air bubbles and creamy consistency. Next, pour the remaining kneading water and continue mixing until the desired mortar consistency is obtained again. After allowing the dough to stand for 5 minutes, a brief kneading will be done to begin with application. If kneading is done manually, increase the times to remove all lumps. Prepare the amount of material to be used within the first 30 minutes. If necessary, reknead the mixture again to maintain its workability but do not add more water. For the application of M – PORCELANIC grille in low absorption ceramic, a rubber trowel can be slipped on the surface diagonally to the joints.