tents:
1. YT-1200 Two-axis gimbal
2. Wireless Remote control
3. Instruction manual
4. Gimbal 1/4-inch quick release plate
5. USB charging cable
6. Mobile phone clip for horizontal and vertical shooting
7. Two AAA batteries
Note:
1. The weight of the camera should not exceed 1kg! Otherwise the camera may shake when rotated.
2. The “CH” channel values of the remote control and the “CH” channel on the pan tilt should be the same, then the remote control can be carried out. (Long press the “S” key on the remote control for 2 seconds to enter the CH channel selection, please press the lower direction key to adjust the channel, and finally press the “S” key to save and exit.)
3. USE THE REMOTE CONTROL turning bottom rotary plate / remotely rotate the pan tilt (DONT turn the pan tilt/bottom rotary plate with your hands).
4. Mode selection or setting on the Remote control: short press the “M” key on the remote control to switch 5 modes, in each mode, press the “S” key to set the button, press the 4 direction keys below to start adjustment For specific parameters, after adjusting the first step parameter, continue to press the “S” key for the next step adjustment. After all parameters are adjusted, the remote control screen will display “OK”. At this time, you need to press the “S” key again to save the settings and Return to the default interface. After finishing the setting, press the “M” key to enter the next mode… , Press the “Start/Pause” key to start the current mode.