Feature: This adjustable equipment allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Time and money saving device. Easy to read and convenient to operate. Package Content: 1 x Magnetic Alignment Camber Castor Gauge How to use: 1. Remove the wheel alignment sensor (Clip tool), remove the tire; 2, The magnetic level gauge carefully on the side of the suction wheel disc brakes; 3, the water level was adjusted to zero; 4, install the required location specific parts; 5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle. 6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)
MEETOZ Universal Magnetic Gauge Tool For Car/Truck Camber Castor Strut Wheel Alignment
€41.99
- Magnetic gauge the Camber and Caster angle on the wheel hub or brake disc
- Suitable for accurate checking of the castor and camber angle
- Has a simple leveling adjustment from -5 degrees to 5 degrees
- With two positioning blisters
- Allows adjustment to maintain correct wheel alignment and even tyre wear
In stock
Additional information
| Weight | 0.28 kg |
|---|---|
| brand | MEETOZ |
| dimensions | 19.6 x 7.9 x 5.8 cm |