Specification:
Chamfering Capacity: c0.1-c1.5
Weight: 0.44kg/0.97lb
No Load Speed: 30000rpm
Reversible Depth: 0.1mm-0.9mm
Chamfered Aperture: ≥ 7mm
Intake Connection: 1/4 inch
Minimum Plate Thickness: 3mm
Minimum Chamfer Diameter: 8mm
Air Intake Adjustment Switch: 5-speed
Exhaust Port: 360°rotary
【How to Replace Blade】
Use a hexagon wrench to loosen the plum screw,remove the baffle plate, remove the blade screw with a ring wrench,remove the old blade,and replace it with a new one.
【Usage and maintenance tips】
1. Before using the new machine, please inject pneumatic tool oil and inject about 4C.C into the air inlet. After continuous use for about 3 hours, about 4C.C is also injected into the air inlet.
2. After injecting pneumatic tool oil, let the machine idling for about ten seconds (do not operate), and let the internal parts of the grinder be lubricated as a whole before proceeding.
3. It is an air compressor (air pump) for mechanical use. The output of the air compressor is about 6~8kg. Generally, most of the compressed gas of a traditional air compressor contains water, and the piston of the air compressor brings out a small part of the lubricating oil. If the oil-water separator is not used, water and oil and gas will enter the inside of the machine for a long time. The occurrence of adhesion slows down the rotation of the machine, resulting in insufficient speed and torque. In this way, the pneumatic tool oil needs to be input into the air inlet, and the machine can be used normally after idling for about ten seconds.