MK Morse JSHRBC01 Job Saw Handle with 6-Inch Reciprocating Saw Blade

0-degree 7-degree steel braking rake for thinner and softer metals such as aluminum.The specialized knife configurator Morse Metal Devil cuts quickly and smoothly thanks to its unique combination of manufacturing quality, metallurgy and blade configuration.TCG (Triple Chip Grind) The configuration of the cutting tip makes the entire cutting tip all the cutting tip makes the entire configuration of the cutting tip makes the entire range of the cutting tip. Cutting point configuration makes the entire cutting tip configuration, making the entire cutting tip configuration, the entire cutting tip configuration makes all cutting point configurations strong because the load is divided between the teeth. This will maximize the resistance of each tooth to wood chips. Blades with more teeth are used for finer cuts and for cutting thinner materials.Blades for cutting steel have a rake of 0 degrees. This configuration creates a stronger tooth with more carbide, where the cut is made. Blades for cutting softer aluminum and thinner metals have a rake of 7 degrees. This creates a forward cut dimension.Fewer seconds per cut.More than 700 openings through 12-inch through 3/8-inch aluminum plate. Our testers have worn themselves in front of the blade. Cuts faster metal Morse Metal Devil cuts steel, iron and aluminum with minimal frictional resistance. Consequently, the time saving is dramatic and important for anyone who tries to do more in a shorter time.In laboratory tests, on average, the metal devil has a 6 inch by 1/4 inch thick steel plate in less than 12 seconds for the first 20 cuts. Cuts metal longer The unique metallurgy of the carbide tips and inner plate made of hardened steel, combined with the configuration of the teeth and the manufacturing quality, creates a circular saw blade that allows more metal cuts than other blades that you attach to a circular saw. After seeing a Morse Metal Devil; blade makes 700 cuts in 12-inch 3/8-inch aluminum plate, our laboratory testers delayed before the blade. Tests cutting angle iron and steel plate also showed that it can be expected that the Metal Devil provides a long service life with virtually any metal cutting system.Cutting by angled steel.Cutting through corrugated aluminium.The importance of coolA big factor in its superior perforation is that the metal devil cuts cool and therefore does not melt aluminum along the cutting line. The unique metallurgy and tip geometry of the blade and cutting tips means that virtually no heat is transferred to the inner plate or the material to be cut. Cool cutting means safer cutting. Imagine cutting a piece of solid steel and immediately pick up the parts on the cutting edge. With the Metal Devil you can do it. Remember how much time you save without waiting for the parts to cool down before picking them up. Morse Metal Devil also minimizes the sparks generated during cutting. With limited sparking and cooling, the likelihood of sparks smoldering in nearby materials or burned when picking up a freshly cut part is eliminated. Cool cutting means cleaner cutting means that painted surfaces do not melt when cutting and leave paint on the edge. This is especially useful when cutting prefabricated building materials, such as metal roofing and siding.