This Unit does not require External Power Adapter if you are going to connect 2.5″ IDE Hard Disk drive, but for any other devices such as 3.5″ IDE, SATA Hard Disk Drive or CD-RW, DVD-RW, CD Rom, DVD Rom it will require external Power Adapter. External power adapter is not included in the package.
Features:
Turns SATA/IDE drive into a convenient external drive, could be used as a bridge to connect SATA 3.5″ hard disk,2.5″ & 3.5″ IDE hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to computer with USB 2.0 interface (Not Suitable for 2.5″ SATA HDD).
Hi-Speed USB interface provides for easy installation with its plug and play design
USB2.0 interface, 480 Mbps high speed data transfer rate. 52X CD-ROM Supported. Supports Hard Disk, CD-ROM, DVD-ROM, CD-RW, Combo Device and DVD-RW to computer with USB 2.0 interface
One IDE 40 Pin Port for internal CDRW, DVDRW, CD Rom, DVD Rom, 2.5″/3.5″ Hard disk, COMBO device and etc
Easy to data backup and exchange USB 2.0 compliant Windows XP/VISTA/7/8/10, Mac compatible don’t need The drive
Quickly access SATA / IDE 3.5″ (40-pin)
IDE 2.5″ (44-pin) device by USB port
Support hot plug, plug and play.
Package Contents:
1 x IDE & SATA to USB Adapter
1 x 4 Pin power cable
1 x SATA cable
(No 220V power supply comes with)
Important Note:
Please set jumper wire to the MASTER mode of your hard disk.
You are required to connect the external power for 3.5” IDE & SATA HDD. And please always remember to remove the external power adapter and disconnect it from the connection if you do not use the hard disk.