htub/shower from dirt and oils.
– For attaching, the bottom of the bathtub / shower must be sprayed with water then place the mat in the bath and press firmly all over, so as to achieve the best anti-slip effect.
– As soon as the suction pads adhere you can fill up the bathtub. Only then should you add bath salts.
– Check before stepping onto the mat that it does not slip!
How to Clean
– After use, rinse the mat with water and paste it on a smooth wall to drain or roll it up to dry.
– Pay special attention to the cleaning of the back of the mat.
– Because the bath water contains human stains, if it is not cleaned or soaked in water for a long time, the mat is easy to breed bacteria and mold.
IMPORTANT CAUTIONS:
– Due to the sealed packaging of the product, there may be a little odor when it is opened, which is normal. Place it in a ventilated place for a few days before use.
– DO NOT bleach / tumble dry, DO NOT use hairdryer / radiator, AVOID direct sunlight or ultraviolet light.
– It is recommended that the bath mat be soaked and cleaned in the warm water for 4-7 minutes in order to remove any dirt before your first use.
– The bathtub or shower floor must be clean and free of any dirt or oils.
– DO NOT USE the mat on a textured bathtub surface or textured shower floor since the suction cups will not hold properly.