Novoferm 202MB Compatible Handsender, Klone Remote Control/4 Channel/433,92MHz Fixed code. Top quality Photocopier Copier.

‘This is top-quality Clone Remote, which will clone your Novoferm 202MB 433.92MHz fixed code remote controls. With this remote cloner you can clone all 433.92MHz fixed code key fobs. How to clone your remote, with an easy programming video: ; https://www.youtube.com/watch?v=cysypsmgpxy or https://www.youtube.com/watch?v=ox4fnlxnxpq. Follow these easy steps to program your remote; ; you need to erase the remote first: 1) press and hold button 1 and button 2 together – Led will flash 3 times 2) Keep Holding button 1 and release button 2 3 times, Led will start flashing Non-stop. (it means if you require more detailed information, remote is erased) ; next you need to clone your original remote: 1) put both (Original and) remotes into “Back to Back position (II)” or “side by side. Make sure they have direct contact, touching each other. 2) press and hold 1 button on your original remote and 1 button on your clone remote. Keep Holding until LED will make: 2 blinks – 3 blinks – steady = successfully cloned, only after the light goes into steady. ; if for some reason the Clone does not go further then 2 blinks, it means the signal does not go through, please slide the remote slowly up and down, until you get the point where it will go through. ; Note: You don’t need an access to you control board or receiver. If you want to increase the remote control reception range up to 150 – 200 meters, then you can connect this aerial: https://www.store.de/dp/b01mtoyb0 °F. We are totally commit to 100% customer satisf action.