Features: Adopt patch photocoupler isolation, strong driving ability, stable performance. Trigger current is 5mA. Module operating voltage is 5V,12V,24V for choice. Each path of the module can be triggered by the high level or low level through a jumper setting. Fault-tolerant design,even if the control line breaks,the relay will not move. Power indicator light (green), 4-way relay state indicator light (red). Humanized interface design, all interfaces can be directly connected through the terminal lead, very convenient. Four fixing bolt holes are provided. Specification: Weight: 18g/0.6oz Common interface load: AC 250V/10A, DC 30V/10A Module Size (L*W*H): 50*26*18.5mm/2*1*0.7inch Bolt Hole: 3.1 mm; 44.5*20.5mm (spacing) Voltage: 5V, 12V, 24V (Optional) Module interface: 1. DC + : connected to the positive pole of power supply (voltage is required for relay, 5V, 12V and 24V for choice) 2. DC- : connect to the power negative pole. 3. IN: high or low level control relay suction Relay output terminal: 1. NO: relay changeover interface,relay suction front suspension, suction and COM short connection. 2: Relay common interface. 3: Relay normally closed interface,relay suction and COM short joint, suction clearance. High and low level trigger selection terminal: 1. When jumper is connected with LOW short circuit, it is triggered by LOW level; 2. High level is triggered when jumper is connected with high short circuit;Package List: 1 x Relay Module
Oumefar Relay Module 1 Channel Optocoupler Relay Module Board High Low Level Relay Module 5V/12V/24V (12V)
$18.99
- 【CHIP OPTOCOUPLER ISOLATION】The relay module uses chip optocoupler isolation for powerful drive capability and stable performance,the trigger current is 5mA
- 【JUMPER SETTING】Each path of the relay module board can be triggered by a high or low level by a jumper setting,relay module with fault-tolerant design,even if the control line breaks,the relay will not move
- 【LOW LEVEL TRIGGERS】The low level triggers the relay module’s power indicator (green) and the 1-way relay status indicator (red),the 1-channel relay module operates at 5V, 12V and 24V.
- 【USER-FRIENDLY INTERFACE DESIGN】High or low trigger module user-friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient,optocoupler isolation four fixing bolt holes are provided
- 【QUALITY AFTER-SALES SERVICE】We are devoted to providing good relay module board and good service for every customer. If you have any questions,please don’t hesitate to contact us for a solution
In stock