✅Description:
1. type of programming: programming with the receiver
2. number of channels: 3
3. code: Rolling code
4. frequency: 433.92MHz
5. range: 10-50 metres (open space)
6. remote control with built-in battery
7. security of use: dynamic code provides a high level of security, non-copyable code.
Note: Your old remote control must be the same as the descriptions, new remote control not compatible with other remote controls.
✅Compatibility list:
Compatible with Chamberlain, Liftmaster, Motorlift remote controls:
84330E, 84333E, 84335E, 8747E
84330EML, 84333EML, 84335EML, 8747EML
94330E, 94333E, 94334E, 94335E
94330EML, 94333EML, 94334EML, 94335EML
✅This remote control is compatible with the following openers:
Garage door openers: ML500, ML700, ML750, ML850, LM600, LM800, LM1000, RDO, GPD60, HC260ML (HC-260 ML ), HC280 (HC-280), HC100ML (HC-100 ML), HC300ML (HC-300 ML), MotorLift HC400ML (HC-300 ML), HC500ML (HC-300 ML), HC600ML (HC-600 ML).
Garage door openers: GPD60, GPD65, GPD 80, TPD100, TPD500.
✅To programme this replacement remote control:
1) Press the programming button on your motor. The LED lights up.
2) Press the desired button on the new remote control.
3) The light on the motor flashes to confirm successful programming. Now the opener works when the button on the remote control is pressed. To delete all codes from the receiver, press and hold the receiver’s programming button until the indicator light goes out (after 6 seconds). All codes that the receiver has learnt will be deleted.
✅Special feature : Replacement hand-held transmitter for Chamberlain 84335EML, 3 channels
✅Colour : Blue
✅Maximum number of supported devices : 3
✅Compatible devices Compatible with 84330E, 84330EML, 84333E, 84333EML, 84335E, 84335EML, 94333E remote control.
✅Connectivity technology : 433.92MHz
✅Number of buttons: 3
✅Controller type Replacement remote control for Chamberlain 84335EML.
✅Maximum range : 10 metres
✅Number of batteries : 1 CR2 batteries required (included)