The relay comes with 2 single channel 5V activation relay, ready to control 250VAC at 10A. Extra isolation with opto-coupler at the front end of control, and the activation logic for relay is configureable via a mini jumpernical Specifications: Channel: 2 channel Working Voltage: DC 5V Normally Open Compatible Load: 10A 250VAC / 15A 125VAC / 10A 30VDC Quiescent Current: 5mA Maximum Current: 190mA Trigger Current: 2 – 5mA Trigger Voltage(Low): 0 – 1.5V Trigger Voltage(High): 2.5 – 5V Insulation resistance: 100MΩ (500VDC) Action time: less than 10ms Release time: less than 5ms Power indicator: Green Relay status indicator: Red Module Size: 50mmX41mmX18.5mm /1.97X1.61X0.73inch(L*W*H)Input interface: DC+: connect to power plus (according to the relay voltage range) DC-: connect to power negative IN: Relay module trigger pin (high or low level trigger optional)Relay output: Normally Open (NO): normally open relay pin. The NO pin is not connected to the COM pin when the relay is off. The NO pin is connected to the COM pin when the relay is on; Common pin (COM): Relay common pin; Normally closed (NC): normally closed pin of the relay. NC pin is connected to COM pin when relay is off. NC pin is not connected to COM pin when relay is on;High/Low Level Trigger: 1. Low-level trigger when jumper and L short circuit; 2. High level trigger on jumper and H short circuitage includes: 2 x Two Channel 5V Relay Module with Optocoupler Module
PENGLIN 2PCS 2 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
¥4,910
- It is 2 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper
In stock
Additional information
| Weight | 0.06 kg |
|---|---|
| brand | PENGLIN |
| dimensions | 15.3 x 8.8 x 2.7 cm; 60 Grams |