Working Mode: Momentary : Press the remote button, the relay connects, release the remote button, the relay disconnects. Toggle : Press and release the remote button to connect the relay. Press the remote button again to disconnect the relay. Latched : Press the A button on the remote control to control the relay A, and the relay B will stop working. Press the B button on the remote control to control the relay B, and the relay A will stop working. Press any button except A Button and B button or press and hold A + B at the same time, all relays stop workingr Code: Press the Learning Button on the receivers 8 times, the codes will be cleaned. After clearing the stored transmitters, all transmitters will need to be relearned by the receiver. Learning Code: (Momentary) Press the learning key on the receiver 1 time, wait for a moment , the LED will be off , it comes into learning state. Press the remote button , LED indicator on the receiver board will flash then come off. Press another button on the remote control, the LED indicator will flash again , and the learning is successfully. Learning Code: (Toggle) Press the learning key on the receiver 2 times, wait for a moment , the LED will be off, it comes into learning state. Press the remote button, LED indicator on the receiver board will flash then come off. Press another button on the remote control, the LED indicator will flash again , and the learning is successfully. Learning Code:( Latched) First press the receiver learning button 3 timesr the light flashes, pair them in order. Press the A button on the remote control to control the first relay, the led light will flash and then go out. Press the remote control B key to control the second relay, the led light will flash again. Pairing completed.
QIACHIP 12V Wireless RF Remote Control Relay Module Switch Receiver 2-Channel 433Mhz with 4 Smart Transmitters for DC Motor, Entrance Control 164ft Long Range
AUD $112.99
- 【Long Range】Small and the performance is stable and reliable, high sensitivity, signal can pass through walls, floors and doors. Range up to 50m in open space. ❤Note:①When the remote control distance can’t meet the requirements, pls replace the battery;②The remote control distance will be affected by the use environment. Do not place the receiver or remote control in a metal case or near a metal object; ③You can try to straighten the receiver antenna to increase the remote control distance.
- 【Wide Application】Application for some equipments with DC motor forward and reverse control, entrance control, etc. NOTE: This receiver have 2 chanel, one for DC motor forward control, another one for DC motor reverse control.
- 【2CH for More Control & Security 】Adjustable working way, on/off. Switch Momentary / Toggle / Latched. All remote control switch kits support 433mhz frequency. Learning code has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
- 【Easy to Install & Flexible】Extremely easy to setup, learn, relearn and control(please refer to details). 2 independent relay channels can either work together (In Toggle) for polarity reversing or individually (Momentary / Latched) to control different electronics. The IC storage capacity on the receiver is limited. Only 15 remote controllers can be stored.
- 【Package Includes】Comes with 4pcs 2 buttons Transmitters and 1pcs 2CH receiver. NOTE: Please email us if you meet any problem, we are always here to help, thanks!
In stock
Additional information
| Weight | 0.28 kg |
|---|---|
| brand | Brand: QIACHIP |
| dimensions |