Installation Instructions:
1. Install the servo to the servo base first, without installing the servo arm or servo protection. Only fix the servo to the frame. Then connect the servo to the receiver, usually the CH1 or ST jack.
2. After the servo is fixed, turn on the remote control, turn on the ESC after setting, and then the servo will stop at a fixed position.
3. Without turning off the remote control and the servo, install the servo protection or servo arm to the servo output gear.
Specification:
Item Type: 40KG Digital Servo
Shell Material: Aluminum Alloy
Color: Black
Size: 40x20x41mm / 1.6×0.8×1.6in
Weight: Approx. 88g / 3.1oz
Number of Teeth: 25T
Rotation Angle: 180°
Dead Zone: 3μs
Working Frequency: 1520μs/330hz
Working Voltage: 5V-7.4V
Speed (6V): 0.2 Second/60°
Speed (7.4V): 0.18 Seconds/60°
Locked Rotor Torque (6V): 36kg/cm
Locked Rotor Torque (7.4V): 40kg/cm
Plug: JR Plug
Applicable Models: Suitable for 1/8 1/10 RC Car and RC Robot, such as for SCX10
Package List:
1 x Servo
5 x Plastic Servo Arm
4 x Screw Barrel
4 x Rubber Pad
1 x Metal Servo Arm
7 x Screw