Delivery
1 x receiver with housing.
1 x remote control with battery range of 200 m (if you need extra remote control, please tell us).
Parameters:
Operating temperature: -20 °C to +70 °C.
Maximum operating current: 10 A.
Operating frequency: 433 MHz.
Working voltage range of relays: AC110 ~ 240 V or DC0 ~ 28 V (relay output can control DC and AC devices).
Antenna: with internal antenna.
Sensitivity: ≥-107dBm
Coding type: learning code.
Board size: 86 mm / 72 mm / 19 mm.
Case size: 100 mm, 80 mm, 28 mm.
Control mode description:
Toggle (1 button on/same button off).
Latch (1 button on/another button off).
Momentary (button function, relay attracts as long as a button pressed).
Adjust.
A. 1-8CH toggle —– Press the transmitter button “1” to learn etc.
B. 1-8CH Momentary —– Press the transmitter button “2” to learn etc.
C. 1-8CH Latch— Press the transmitter button “4” to learn etc.
D. 1-4CH Toggle 5-8CH Momentary —— Press transmitter button “8” to learn.
Learning and steps
1. Press the learning button of the receiver until the LED indicator is on, and then release the button. The receiver now remains in the status of learning.
2. Then you can press the appropriate button according to your requirements. If the indicator LED flashes 1 time, it means that learning is successful.
Delete the learning code.
Press and hold the learning button of the receiver for 8 seconds until the LED indicator is OFF (buzzer sounded for about three seconds), it means that all stored codes have been successfully deleted.