Working Mode: Mode “O”: ACC mode, when your car ACC is off, the OBD power cable will also power off after 5 minutes. Mode “—”: Surveillance mode, when you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage),it will power off after 30 seconds. The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving. Attention: 1. Please note that the OBD power cable is only working for dash cams which range from 8V-36V,other voltage range is not supported. With the step-down function, the voltage will be converted to 5V output. 2. Please make sure you have installed the OBD adaptor and hiding the cable perfectly, in case of affecting your driving for safety. 3 OBD2 definition is ” pin4 for ground, pin5 for signal,pin16 for power supply”,this definition can cover most of the vehicles,but if some vehicle models use different definition from ours, it may cause dashboard warning or other errors. Spec: ACC mode Input: 13V-36V | Output: 5V/2.1A Surveillance mode Input: 11.6V-36V | Output: 5V/2.1A Extension cable: 3.5meter(11.5 ft) length Interface: micro USBAbout us: We are a factory which specialized in automotive accessories&cables industry,we can do OEM/ODMome to contact us for customization and wholesale business. Our Products: OBD-II & J1939 J1708 J1962 cables Cigar lighter chargers & cables Dashcam accessories & cables Backup cameras & cables
REARMASTER Universal OBD Power Cable for Dash Camera,24 hours Surveillance with mode switch button (mirco-usb)
₹4,533
- Make sure this fits by entering your model number.
- Designed to free up your cigarette lighter socket and supply a 24 hours continuous power to your dash camera via OBD connection, enable your dashcam to keep working on after you have parked the car.
- Dual working mode switch button integrated for your convenience: 1 working mode,5 minutes off when your car ACC is off; 2. Surveillance working mode, keep working until it detects low battery voltage(11.6V).
- Obtaining power from ODB interface only, no interference in other ODB data communication.
- 3.5meter(11.5 ft) length extension cable,Micro USB portt: 8V-36V | Output: 5V/2.1A
- Tips:Our OBD2 definition is ” pin4 for ground, pin5 for signal,pin16 for power supply”,this definition can cover most of the vehicles,but if some vehicle models use different definition from ours, it may cause dashboard warning or other errors.
In stock
Additional information
| Weight | 0.1 kg |
|---|---|
| brand | Visit the REARMASTER Store |
| dimensions |