ion: New
Material: Plastic
Color: Black & silver
Rated Voltage 12V
Rated Current: 14mA
Operating Frequency: 433MHz
Remote Control Range: Up to 50 meters
Supported IC CODE: PT2262, PT2260, PT2264, PT2240, EV1527 etc. The Codes that have the same suffix like SC2262 and PT2262 are also supported.
With this replacement remote key you can clone all 433.92MHz fixed code key fobs based on supported IC.
Size: Approx. 5.5 * 3cm / 2.2 * 1.2in
Total Length: Approx. 9.7cm / 3.8in
Weight: Approx. 28g
How to Program:
1. Simultaneously press the two top buttons(A & B for about 3 seconds until the red light flashes quickly (Pls finish this step before you going on the next).
2. Place the replacement remote key and the original one as close as possible.
3. Simultaneously press a button on your original remote key and one of the buttons on the replacement and hold them until the red light on the replacement flashes steadily. (The red light will first flash 3 times quick, then stops for a second, and then flashes steadily when cloned successfully). Programming is now successful! If you want to program more buttons, simply repeat steps 2
4. To reset the remote simply start again with step 1.
5. If you reset your replacement remote key incautiously, just press the two bottom buttons(C & D for about 3 seconds until the red light flashes quickly.
Copy method:
First determine the operating frequency of the remote control.
1. Clear code and restore
Hold down the A and B buttons at the same time, make sure that the LED light flashes once and then goes out without letting go. After 2 seconds, the LED light starts to flash quickly, which indicates that the code has been cleared.
Problem: When the light is off or always on when two buttons are pressed, it means that the two buttons are not pressed at the same time.
2. Copy
The two remote