Room Thermostat COMPUTHERM T-32 Digital Room Thermostat

267.99

  • Desired temperature: Thanks to the temperature controller, you can easily adjust the desired temperature between 5 and 30 C in increments of 0.5 C there is also a temperature selector for two different desired temperatures (heating and cooling).
  • Constant indoor temperature: the digital thermostat includes a switching sensitivity of either 0.2 or 0.1 degrees and thus allows an even and constant room temperature – for maximum comfort and a certain feel-good factor.
  • Digital thermostat: this thermostat is conveniently attached to the wall of a room and can be used for any boiler that has a two-line connection of the room thermostat (load capacity: 8 amps)
  • Precise temperature measurement & setting: the digital display of the room thermostat allows for more precise measurement and setting of the temperature than traditional thermostats – both heating and cooling are possible.
  • Box contents: 1 x T32 digital room thermostat, 2 x Computherm batteries, mounting material, wall thermostat from COMPUTHERM incl. 5 year manufacturer’s warranty.
  • The device must be installed by a competent person

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

ERM T32 room thermostat is suitable for controlling the vast majority of boilers and air conditioners available in the EU. It can be easily connected to any gas boiler with a two-wire thermostat connection point and to all air conditioners or electrical appliances, regardless of whether they have a 24V or 230V control circuit. Temperature can be measured and adjusted more accurately on the digital display compared to simple, conventional thermostats. In heating mode, the thermostat turns the boiler or other devices on and off below and above the set temperature, helping to reduce energy costs while maintaining comfort. In cooling mode, it switches in the opposite direction. With the temperature control buttons (and ) on the thermostat, you can set the desired temperature in steps of 0.5 °C between 5 °C and 30 °C. The thermostat regulates the temperature. connected device (e.g. a gas boiler or pump) according to the measured temperature and the currently set temperature, taking into account the switching sensitivity of the thermostat of ± 0.2 °C. This means that when the thermostat is in heating mode and set to 22°C. With a switching sensitivity of ± 0.2 °C, the NO and COM connection points of the receiver close output relay at temperatures below 21 °C. 8°C (the heater turns on) and is open at temperatures above 22.2°C (the heater is disabled). In cooling mode, the relay switches exactly in the opposite direction. After a temperature change with the thermostat temperature setting buttons (and ), the switching sensitivity is not taken into account, so that the thermostat is switched on even if there is a difference of ± 0.1°C (heating is off).

Additional information

Weight 0.16 kg
Brand

Calorsol

EAN

5999884641681