pe: Mini Manual Sewing Machine
Material: Stainless Steel, Plastic
How To Use
1. Hold the machine: Hold the machine base with the four fingers of the right hand, and place the thumb on the top of the upper cover of the machine body to hold the machine smoothly.
2. Threading: Gently pull out the thread on the spool. Pass through lead diagram A, and then introduce the tensioning tab
B. Go through the lead wire again. C. The thread that has been drawn is temporarily placed besides the needle, and the threader is passed through the needle hole from the front of the needle (to the body joint), and then the thread is introduced into the small hole of the threader, exit the threader and pull out the head thread About 2-3 cm pressure plate can be pressed
3. Placing the cloth: Use the index finger of the right hand to lift the pressing plate, put the fabric to be sewn (thickness not more than 0.8 mm) under the pressing plate, and gently put it back on the pressing plate to press the fabric
4. Sewing operation: Hold the fabric with the left hand, press the top of the upper cover gently and quickly with the thumb of the right hand, and press the top of the cover to the bottom, and then press the thumb down again. Repeatedly, the cloth feeding mechanism automatically sends the sewing material to the left. The right hand of the machine is gradually moved to the right, and the left hand is holding the cloth to gently move the sewn material to the left according to the sewing rhythm, until the sewing ends;
5. End: When sewing is over, cut the thread with scissors, and gently pull up the pressure plate to take out the fabric. From the reverse side of the fabric to be sewn, pull out the last section of thread, make it pass into the following section of the loop, pull it tight and tie a knot, the stitch will be firm, do not pull the thread by hard pulling the fabric at the end of sewing head, so as not to damage the