Specification
Material: Plastic
Model: TS-WP10
Weight: Approx. 308g / 10.9oz
Product Size: Approx. 3.5×10.5×11.5cm / 1.4×4.1×4.5in
Waterproof: IP65
Power Supply: DC5V or 3 x AAA Battery (Battery Not Included)
How to Use: (See the manual for details)
1. Plug in the DC power cord or battery power supply (battery not included)
2. The product is powered on, the LED is full displayed for 3 seconds, the backlight color is red, orange and white cycle, and the initial interface of the system is displayed after the bi beeps.
3. Time setting: In the time display mode, long press the MODE key to enter the setting state
4. Alarm setting: In the time display mode, short press the MODE key to switch to the alarm display
5. Snooze mode: In the alarm mode, short press the CLEAR key to enter the 5-minute snooze mode, press any other key to exit the alarm mode.
6. In the time mode, short press the 10 key to set the countdown time, each press within 3 seconds will add 10 minutes, up to 99 minutes; short press the 1 key to set the countdown time, each press within 3 seconds will add 1 minute , up to 99 minutes.
7. Temperature and humidity upper/lower limit alarm setting: In the time display mode, short press the ALERT key to turn on or off the temperature and humidity alarm function.
8. Temperature and humidity calibration function: In the time display mode, press the MODE key and the + key at the same time to enter the temperature value calibration state.
Package List
1 x Bathroom Clock (Battery Not Included)
1 x Power Line
1 x Suction Cup
1 x Manual
Note
1. Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.