on:
Item Type: Drone Strobe Light
Material: Resin (circuit board)
Gross Weight: 31g / 1.1oz
Color: Transparent
Light Color: white, red, green
Built in Battery: 3.7V 90mAh lithium battery (built in)
Charging Time: 30 minutes
Service Time:
Red and Green Quick Flashing: about 7 hours
Red and Green Slow Flashing: about 6 hours
White Steady: about 1 hour
White Quick Flashing: about 4.5 hours
White Slow Flashing: about 2.5 hours
Charging Voltage: 5V 1A
Charging Port: Type C charging port
Light Source Mode: fast blinking, slow blinking, steady on
Long Press Key: switch on and off
Click Button: switch the light flashing mode
Charging Indicator: red is charging, green is full
Product Size: Approx.2.8 x 1.6 x 1cm / 1.1 x 0.6 x 0.4inch
Applicable Models: for Mini 3 Pro, for DJI Mavic series, for Spark, for Phantom 3/4, for FIMI X8SE, for FIMI Mini
Instructions for use:
1. Hold down the on off button for 2 seconds.
2. After starting up, the single machine button can switch the light model circularly.
3. After shutdown, press the button to check the remaining battery power before the point, and keep it for 6 seconds.
Installation method:
1. Stick two sides of hook loop on the drone and the flash light respectively.
2. Rub each other after pasting to make it stick firmly.
Package List:
1 x Strobe Light
1 x Charging Cable
1 x A Set of Hook Loop(10 Accessories in Total)
1 x Instruction Manual
Note:
1. Drone and other accessories are not included in the delivery;
2. Due to manual measurement, please allow an error of 1‑3mm. Thank you very much!
3. Due to different shooting lights and differences between monitors, the picture may not reflect the actual color of the object.