1. With door closed, measure bottom of door width2. Unclip concealing cover and slide brush out of carrier/housing3. Cut carrier/housing to size using hacksaw – cut through small metal rod (only 3mm wide) holding brush in placetipcrimp brush metal HOUSING using pliers to prevent brushes falling out – IE squeeze ends with pliers so they are compressed. Offer up door seal against door, so bottom of brush is only just above floor surface closing gap between bottom door and floor, and mark where holes appear against door with penciltipdrill pilot holes for screws so screws Can be screwed in without damaging screw head5. Remove adhesive tape backing, position door seal, and screw firmly to base of door6. Adjust If necessary for perfect fit – slotted holes aid adjustment up or down7. For attractive finish, press cover strip onto carrier.
STORMGUARD B00CVQW2TI 02SR0720838DWO Bottom Door Brush Seal 838mm with Concealed Fixing Cover-Dark Wood Effect, Chrome
₹1,656
- Seals gaps 0mm To 25mm – stops cold under door draughts
- Polypropylene brush (26mm high) in PVC carrier (20mm high)
- Plated screw fixings and pre-drilled fixing holes
- For use on doors opening into rooms with tiles, vinyl, wooden floors or carpets
In stock
Additional information
| Weight | 0.16 kg |
|---|---|
| brand | STORMGUARD |
| dimensions | 34.25 x 1.77 x 0.39 cm; 154.22 Grams |