1. Install the steering gear to the steering gear base first, without installing the steering gear arm or steering gear protection. Only fix the steering gear to frame. Then connect the servo to the receiver, usually the CH1 or ST socket.
2. After the steering gear is fixed, turn on the remote control, and then turn on the ESC after setting it, and then the steering gear will stop at a fixed position.
3. Without turning off the remote control and the steering gear, install the steering gear protection or the steering gear arm to the steering gear output gear.
Specification:
Item Type: 40KG Metal Gear Steering Gear
Color: Black
Dead Zone: 3μs
Number of Teeth: 25T
Rotation Angle: 180°
Shell Material: Aluminum Alloy
Weight: Approx.180g/6.3oz
Size: Approx. 40x20x41mm/1.57×0.8×1.61in
Working Frequency: 1520μs/330hz
Working Voltage: 5V-7.4V
Speed (6V): 0.2 Seconds/60°
Speed (7.4V): 0.18 Seconds/60°
Locked Rotor Torque (6V): 36kg/cm
Locked Rotor Torque (7.4V): 40kg/cm
Plug: JR
Application: 1:8/1:10 RC Car (such As for SCX10, Etc.) Robots, Etc.
Package List:
2 x Servo
10 x Plastic Steering Gear Arm
8 x Screw Barrel
8 x Rubber Pad
2 x Metal Steering Gear Arm
14 x Screw