Specification:
Product material: Nylon fiber
Product size: 80 x 70 x 46mm / 3.15 x 2.76 x 1.81in
Product weight: 0.25kg / 0.55lb
High temperature resistance: Up to 70°C / 158°F
High lift: 5m / 16.4ft
Application: Intelligent toilets, head massage equipment, etc.
Power supply methods: Powered by battery, solar panel, or power adapter connected to household electricity
Voltage: 12V, 24V (Optional)
Power: 20W
Current: 1.5A
Power cord length: 1.5m / 4.92ft DC female connector
Inlet and outlet diameter: 20mm / 0.79in threaded
Flow rate: 700L/h
Note:
1: Before using the water pump, users must first check whether the rated voltage indicated on the nameplate on the pump matches the actual operating voltage.
2: This water pump can only be used in fresh water or seawater, and cannot be used in other highly corrosive liquids.
3: Do not operate this pump in water above 36°C (99°F) or below freezing point, as it may cause damage to the pump.
4: Do not let the water pump run dry or idle for a long time to avoid damaging the pump body.
5: The power cord of the water pump cannot be replaced. If any damage is found to the power cord during use, the pump must be stopped.
6: When installing, removing, and cleaning the water pump, it is necessary to first unplug the power plug and cut off the power to ensure safety.
7: A single pump cannot be used independently, nor can it run without water.
Packing List:
1 x Water Pump