Additional information
| Weight | 0.4 kg |
|---|---|
| Brand | TsuFantisi |
| EAN | 0765150622051 |
| UPC | 765150622051 |
T/F 4 Pack White Climbing Rings are for Dolphin Robotic Pool Cleaners M200 M400 M500 DX3 DX4 DX6 Replaces Part Number: 6101611
₹6,091
- Models of replaceable dolphin robot climbing ringM200, M400, M500, DX3, DX4, DX6, Nautilus, Nautilus CC Plus, Oasis Z5i, Aquarius XL, PremierSigma, Triton (old), Deluxe 4/5, Saturn (old), Atlantis, Apollo, Apollo Plus, Wave 65, Endeavor, Edge, HD, 3001, 2X2, Wave 2X2, Prowler 820/83.
- Part number 6101611-R4 Package includes: 4pcs Rings for dolphin Robot Swimming Pool Cleaner.
- Once you know the basics, it will become easier to disassemble, replace the worn-out parts of your Dolphin pool cleaner. But the exact process may vary from model to model, Open the sides of the pool cleaner, You will need a screwdriver to remove the 4 screws on the side panel, Remove the tracks on each side/end of the opened pool cleaner, Snap out the ends of the brush roller, Only when both ends are snapped out that you can lift the brush roller out of the pool cleaner’s frame, Use a flathead screwdriver to pry the small cap off the end of the brush roller’s center tube, Remove the roller’s center tube and then remove the gear caps.
- CAUTION: Check the climbing rings’ pliability. Whether you are replacing both or just the climbing rings, dried-out foam rollers are difficult to remove and may damage the brushes. Soak the brush roller in water until they become softer and more pliable, Slide the climbing rings off the brush rollers.
- Install the new climbing rings. When you receive the new rings, please soak it thoroughly in water in order to prepare the product for optimal usage. Be careful in installing the climbing rings. Slide them in slowly and ensure that they are sitting in their designated space, Reassemble the brush roller assemblies, replace them in their designated slots, return the tracks, and screw back the side panels.
In stock