1. Type of programming: programming with the receiver
2. Number of channels: 3.
3. Code: rolling code.
4. Frequency: 433.92 MHz.
5. Range: 10-50 m (open space).
6. Remote control with built-in battery.
7. Safety of use: dynamic code provides a high level of security, non-copy code.
Note: your old remote control must be the same as the
Descriptions, new remote control not compatible with other remote controls.
Compatibility list:
Compatible with Chamberlain, Liftmaster, Motorlift hand transmitter:
94334CE, 9747E, 94330EWK
84330E, 84333E, 84335E, 8747E
84330EML, 84333EML, 84335EML, 8747EML.
94330E, 94333E, 94334E, 94335E
94330EML, 94333EML, 94334EML, 94335EML
This remote control is compatible with the following openers:
Garage door opener: ML500, ML700, ML750, ML850, LM600, LM800, LM1000, HC260ML (HC-260 ML), HC280 (HC-280), HC100ML (HC-100ML), HC300ML (HC-300ML), MotorLift HC400ML (HC-300ML), HC500ML (HC-300ML), HC600ML (HC-600ML).
Garage Door Opener: GPD60, GPD65, GPD 80, TPD100, TPD500
How to program this replacement remote control:
1) Press the programming button on your motor. The LED lights up.
2) Press the desired button on the new remote control.
3) The light on the motor flashes to confirm successful programming. Now the opener works when the button of the remote control is pressed. To delete all codes from the receiver, press and hold the learning button of the receiver until the indicator light goes out (after 6 seconds). All codes learned by the recipient will be deleted.