T500 Leak Sealer is used in domestic heating systems for sealing small, internal and inaccessible leaks and weeping joints. It is suitable for use with all metals, including aluminium. A seal works best in warm/hot circulated water and once it has been evenly dispersed, will be effective within 24 hours (this will vary depending on the rate of leakage and the temperature). Cleansing Circulate T300, with all the valves open, for a minimum of 2 hours after central heating has maintained working temperature but can be left in for up to four weeks. Application 500ml of Leak Sealer is sufficient to treat a typical domestic system of up to 10 radiators, or 100 litres of system water. Larger systems will require more. After dosing is complete, the system should be operated normally for at least 15 minutes (heat is beneficial). Open systems: Dose via F&E cistern, via a bypass feeder or use a dosing vessel. Sealed systems: If the system is empty, add to any convenient part before filling. If full, inject via the filling loop, or other access point.
Trident – Central Heating Leak Sealer – 500ml – Seals Small Leaks and Weeps – Suitable for All Metals Incl Aluminium – Effective in 24 Hours
AUD $84.99
- Easy to use and readily dispersible.
- Single bottle ample for a typical system.
- Designed for pin hold leaks.
- Safe on all system materials
- Will not cause blockages.
In stock
Additional information
| Weight | 0.5 kg |
|---|---|
| Brand | UK Radiators |
| EAN | 5056675434195 |