Specification:
Name: 6-Port SATA 3.0 Expansion Card
Model: PCE6SAT-M01
Main control: for marvell 88SE92xx 109X
Interface: PCI-E 1x, 2x, 4x, 8x, 16x
Support system: for WINXP/WIN7/WIN8/WIN10/LINUX
Bus Interface: PCI Express x1 slot
Expansion interface: 6 SATA 3.0 interfaces
Product size: approx. 12 x 10 x 2 cm/4.7 x 3.9 x 0.8 inches.
The PCIE to SATA3.0 riser card is used as follows:
First, the system disk and PCIE to SATA 3.0 riser card connection conditions and solutions:
1. The SATA interface mode from PCIE to SATA3.0 is AHCI mode. If you want to connect the system hard drive on our card, you must install your system hard drive on the motherboard in AHCI mode when installing the system. Otherwise, the system cannot be started via our transfer card.
2. If it is determined that the SATA interface installation system of the motherboard is in AHCI mode, you can insert the hard drive directly into our card and then call the motherboard BIOS to set the system disk first.
3. If the above two conditions are met and the motherboard’s hard disk interface is still not booting or restarting repeatedly, this may be due to the conflict between the motherboard’s hard disk interface and our transmission card. The solution is to call the motherboard BIOS and set the motherboard’s hard drive interface option to Disabled. Save and restart to boot the system.
Package contents:
Riser card x 1.
Half-height baffle * 1