g internet connectivity issues after completing the setup process? Please verify that you’ve entered the correct password for your router, ensuring that there are no special characters within it. If special characters are present, we recommend changing your router password, as repeaters may not recognize them.
Wondering how to reset the repeater? Simply press and hold the reset button for 10 seconds while the device is powered on. Please note that this button is located on the side of the repeater, not to be confused with the WPS button.
IF YOU FIND YOURSELF UNABLE TO ACCESS THE REPEATER’S WEB MANAGEMENT PAGE, CONSIDER THE FOLLOWING STEPS:
A1: Confirm that your computer is connected to the extended network.
A2: Ensure that your computer is set to obtain an IP address automatically.
A3: If the repeater is connected to the router, check your router’s DHCP client list to obtain the repeater’s current IP address.
A4: If all else fails, perform a reset on the repeater.
WONDERING WHY THE WIRELESS TRANSMISSION RATE SLOWS DOWN WHEN THE WIRELESS SIGNAL APPEARS STRONGER AFTER GOING THROUGH THE REPEATER?
It’s advisable to connect to the extender in cases of poor home network connections or when you need broader wireless coverage to eliminate dead zones.
IF DEVICES CONNECTED TO THE REPEATER CANNOT OBTAIN AN IP ADDRESS OR ACCESS THE INTERNET, CONSIDER THESE POTENTIAL SOLUTIONS:
A1: Check if you’ve enabled a wireless MAC filter, wireless access control, or access control list (ACL) on your router. To resolve this, log into your router and disable these features.
A2: Ensure that the repeater has been successfully connected to your router by resetting it and reconfiguring.
A3: It’s possible that the router’s IP address is occupied or the wireless device limit has been reached. Reboot your router, reset the repeater, and reconfigure to address this issue.