YATO Professional Hose Plumbing Probe – Flexible Plumbing Tool for Sinks and Drains (3 Meters x 6 mm) | Hose Spring with Claw

YATO 3 m x 0.6 mm hose probe allows fast and professional “DIY” resolution and ECOLOGICAL on any filling problem.
FEATURES AND CORRECT USE OF THE PRODUCT
1)The YATO hose probe 3 m x 0.6 mm is a FLEXIBLE but NOT ELASTIC probe, this means that when you need to insert it into the clogged drains you should not enter it immediately for its entire length but PROGRESSIVALLY drop the probe slowly inside the obstruction until you encounter the obstruction and consequently the probe arrears. will be his disc. esa In case you immediately insert all the probe into the clogged exhaust it is possible that it will be HOT and consequently be unusable.
2) When you have reached the obstruction, you do not need to push forcefully or turn the crank with excessive force because this prevents the probe from clearing properly. Drop the probe carefully until obstruction then start turning the crank counterclockwise. If it did not take effect or have not found the obstruction and the crank turns vacuum or you are exerting excessive force.
3) It is not necessary that the probe be be the same length as the pipe or filling, it can also be longer, in this case you simply will not use it throughout the length available. Important, however, is the width that must be about 30% smaller than the pipe so that it can actually fit correctly and without forcing the descent.
PLEASE NOTE:
With the purchase of the product, you will receive the instruction manual of the YATO hose probe for further specifications on the use of the correct product.
RECOMMENDED FOR:
Sinks, drains and drains
Bending spring
o stura toilet.
stura shower
The bathtub stura
Sorting sewerage system
ACQU file